1st Model Smith & Wesson Schofield Cavalry Revolver - Fine
- Product Code: FHG-JM150-SOLD
- Availability: Out Of Stock
-
$0.00
In 1870 the US Army purchased its first large lot of self-contained cartridge handguns. The purchase included 1,000 .50 caliber Remington Rolling Block single shot pistols, 1,000 Remington New Model Army .44 caliber revolvers altered to metallic cartridge and 1,000 Smith & Wesson Model #3 “American” Revolvers in .44 S&W. While both officers and the rank and file had been requesting cartridge revolvers from the Ordnance Department since the end of the American Civil War, two large stumbling blocks had prevented the Army from abandoning the .44 caliber percussion revolver. The first was the fact that the Rollin White patent for the bored through cylinder, which was held by Smith & Wesson, would not expire until 1869. The Ordnance Department understood that no other manufacturer could produce a successful metallic cartridge revolver design until that patent expired, and the concept became public domain. Secondly, the Army had a massive inventory of percussion revolvers that were now becoming obsolete and had limited value for sale on the commercial market. As a result, the army continued to use its percussion revolvers well into the mid-1870s.
The three types of cartridge handguns purchased all had their various supporters and detractors. The Rolling Block pistol was strong, simple, and durable, but only offered a single shot. The altered Remington revolvers functioned suitably but were still considered “make do” conversions of obsolete guns from the Civil War. The new Smith & Wesson design was modern and offered rapid loading and unloading due to its top break design with a built-in automatic extraction system and offered equally quick reloading. The downside to the Smith & Wesson was that it was somewhat delicate, with numerous small parts that were prone to breakage, and it was questioned whether it could stand up to the rigors of duty on the western frontier.
One army officer who was particularly impressed by the Smith & Wesson design was Major George W. Schofield of the 10th US Cavalry, one of the famous regiments of “Buffalo Soldiers”. Schofield was so impressed with the design that he arranged to act as a sales agent for Smith & Wesson. Schofield sold over 100 Smith & Wesson #3 American revolvers between the fall of 1870 and spring of 1871. Most of those guns were almost certainly sold to other cavalry officers, and as a result Schofield started to build a foundation of support for the Smith & Wesson design. Schofield did note that there could be improvements made in the #3 design and went to work to modify the revolver to be more cavalry friendly.
The most striking improvement was to redesign the latch that closed the top-break frame. The original #3 design had the latch mounted in the top strap of the revolver and required the user to hold the gun with one hand and lift the latch to break the gun open with the other hand. This was awkward at best on horseback, and even more difficult if the horse was moving any faster than a walk. Schofield’s improvement relocated the latch to the frame of the revolver and designed the catch so that the thumb of the right hand could depress it while the pistol was being held in a conventional grip. The top of the barrel of the pistol could then be pushed against the trooper’s leg or saddle, opening the action, and ejecting the empty cartridges. This allowed one handed opening and ejection and made the gun much easier to use on horseback. Schofield also designed improvements to the ejection system and received patents for his innovations in June of 1871 for the latch and April of 1873 for the ejection system. With these improvements to the revolver, Schofield proceeded to arrange for US Ordnance Department trials of the new pistol. However, Schofield was a little late.
In November and December of 1872 additional trials had taken place between several models of Smith & Wesson and Colt revolvers. The winning design was the Colt, a gun that would become the most famous and recognizable handgun of the old west era, the iconic Model 1873 Single Action Army, aka “Peacemaker” or as Colt referred to it, the Model P. The Colt design was found to be more durable, simpler, stronger, more accurate and to contain significantly fewer parts, when compared to the Smith & Wesson submissions. After the favorable testing, Colt received an order to deliver 8,000 revolvers chambered for the new .45 Colt cartridge, the cartridge found most desirable by the Ordnance Department after testing numerous cartridge designs between 1872 and 1873.
Schofield should have accepted defeat at this point, but he had quite a bit of political pull within the army. His brother was General John Schofield of Civil War fame, and the General was a friend of General William Tecumseh Sherman, who served as General of the Army from 1869-1883, essentially the 19th century equivalent of the Commander of the Joint Chiefs of Staff. General Schofield had also served briefly as the Acting Secretary of War (June 1868-March 1869), had been in command of the Military Division of the Pacific and in 1876 would be made the Superintendent of The US Military Academy at West Point. Between Major Schofield’s inroads with officers who supported the Smith & Wesson design and the political influence of his brother, he managed to get his redesigned Smith & Wesson revolver in front of the Board of Ordnance for review in June of 1874. The findings were sufficiently positive that a contract was let to Smith & Wesson for 3,000 of the new “Schofield” model revolvers in September of 1874. These guns would become known to collectors as 1st Model Schofield revolvers.
The “Schofields” were six-shot, single-action revolvers with 7” ribbed barrels, a square butt profile and two-piece walnut grips. While most were blued with color case hardened triggerguards and hammers, some were delivered with a factory nickel finish. These .45 caliber revolvers were chambered for the new .45 S&W (aka .45 Schofield) cartridge. The action of the revolver could not function reliably with the standard .45 Colt cartridge. The Colt cartridge was too long for the Smith & Wesson cylinder, and the rim of the Colt cartridge was too small to be effectively engaged by the star extractor of the Smith & Wesson design, which meant that the Colt cases would fall through the extractor and become stuck in the cylinder chambers. The .45 S&W cartridge was about .10” shorter than the .45 Colt, with a larger rim, and slightly smaller powder charge and lighter bullet. The Smith & Wesson cartridge could often be used in the Colt revolvers, but the Colt cartridge could not be used in the Smith & Wesson guns. Initial reports from the field were positive enough that a second contract was let to Smith & Wesson for 3,000 more revolvers in March of 1875. These would become known to collectors as the 2nd Model Schofield. In all, a total of 5,285 2nd Model Schofields were delivered to the US Army between 1876 and 1877, with a total production of 5,934. In most respects the guns were identical to the preceding “1st Model”, with the most noticeable improvement being the dishing out of the barrel catch to make it easier to put your thumb into it and open the action. This also changed the profile of the catch itself and the rear sight that was built into the catch. The other major change cannot be seen, but the frames of the 2nd Model Schofield revolvers were made of steel instead of iron. Major Schofield received a $.50 per unit royalty payment for design improvements for every 2nd Model that was sold but did not receive any royalty payments for the 1st Model revolvers.
The Schofield revolvers were issued throughout the US cavalry in an attempt to get good side-by-side comparisons of their effectiveness and durability as compared to the Colt M1873. The guns saw significant service with the 4th US Cavalry, as well as with the 9th & 10th US Cavalry Regiments (the Buffalo Soldiers). However, it was not long before the original complaints about the Smith & Wesson #3 in terms of fragility and mechanical issues began to rear their ugly heads again. However, the ammunition for the guns caused an even bigger problem. The intentional issue of the Colt and Smith & Wesson revolvers to the same regiments resulted in ammunition snafus. In an attempt to circumvent this issue, Frankford Arsenal developed a universal cartridge for use in both revolvers. It was shorter and lower powered than the .45 Colt and had a slightly larger rim to help with extraction from the Smith & Wesson. However, it was not uncommon for .45 Colt ammunition to be issued to troops with Schofield revolvers, who could not use it in their guns. Likewise, the .45 S&W ammo had such a large rim that it often prevented all of the chambers from being loaded in a Colt revolver or could even cause the Colt cylinder to bind up and prevent rotation. Despite the significant advantage in unloading and loading speed that the Schofield offered over the solid frame Colt design, the numerous small issues with the mechanism and the ammunition difficulties resulted in the gradual removal of the Smith & Wesson revolvers from US military service. This is somewhat ironic, as during the decade from 1873 to 1882, Smith & Wesson would produce about twice as many of their large frame single action revolvers (mostly variants of their New Model #3 revolver) than Colt would produce Single Action Army revolvers. Smith & Wesson found their success with the civilian market and with foreign military contracts, while Colt continued to find the US government their most lucrative customer.
During the 1880s, the US military began divesting themselves of both 1st and 2nd Model Schofield revolvers. The guns were primarily sold to Schuyler, Hartley & Graham and Francis Bannerman & Company, both of New York. Many of these guns were subsequently altered by having their 7” barrels cut down to 5”, and many of the guns were nickel-plated for civilian sale. The single largest customer for these altered Schofield revolvers was the Wells Fargo Express Company, who marked the guns W.F. & Co. Ex. when they purchased them. However, some Schofield revolvers remained in service right up to the era of the Spanish American War, and some are noted by serial number in the Springfield Research Service series of serial number books as being in used during the mid-to-late 1890s, mostly with State and National Guard units. As the large majority of military contract Schofields were sold as surplus and altered during the 1880s and 1890s, it is difficult to find them in fine original condition and in their original configuration. Much like the 7 ½” Single Action Army “Cavalry” revolvers that were subsequently altered to mixed number, 5 ½” “Artillery” configuration, original configuration “Cavalry” Schofield revolvers are scarce and extremely desirable, particularly the 1st Model guns as fewer of them were produced.
Offered here is a FINE condition example of a Smith & Wesson 1st Model Schofield cavalry revolver. The gun is 100% complete and correct in every way and remains a crisp, unaltered example of a scarce US military revolver from the height of the Indian War era. The revolver is serial number 1580, and that number is clearly stamped in the butt of the revolver, along with the ownership mark US. The serial number is also clearly stamped on the rear face of the cylinder, inside the barrel catch on the topstrap, on the left side of the topstrap of the barrel under the catch, and inside the right grip panel. The inspector initials L and P are crisply stamped on the bottom face of the barrel web, with the initial L on the rear face of the cylinder and on the inside top of the bottom of the frame. The “L” is the mark of Springfield Armory civilian sub-inspector Samuel B. Lewis. His “L” is also present on the bottom of the left grip panel. The left side of the ejector housing is clearly stamped in two lines, with a large Maltese Cross at each end of the legend:
+ SMITH & WESSON SPRINGFIELD MASS. U.S.A. PAT. JAN. 17TH +
& 24TH 65. JULY 11TH 65. AUG 24TH 69. JULY 25TH 71.
The right side of the ejector housing is marked in a single line:
+ SCHOFIELD’S PAT. APR. 22D 1873 +
This line is also flanked by a pair of smaller Maltese Crosses. The left grip also bears a very fine script SBL cartouche that remains fully legible. These are the initials of the previously mentioned civilian sub-inspector Samuel B. Lewis. To date, Lewis’ cartouche has only been found on some 1st Model Smith & Wesson Schofield Revolvers, with the majority of them apparently inspected by US Ordnance Department sub-inspector Lt. J.F.E. Chamberlain with his JFEC cartouche. However, Lewis’ small block letter “L” sub-inspection is found on some of the small parts is also found on some early Colt M1873 Single Action revolvers that were part of US Ordnance Department contracts. Based upon the serial number, this gun would have been produced about halfway through the production for the 1st Schofield contract.
The pistol remains in FINE condition. The frame retains about 60%+ of its original blue overall, showing streaky flaking, toning, and fading. The finish is most prevalent on the frame the areas behind the recoil shield, back towards the grips. There is also strong blue remaining on the rear of the recoil shield and on the bottom of the frame. The barrel retains about 10%+ of its original blue which is most prevalent in the groove between the barrel and the rib, along the bottom of the barrel and around the web and lug. The cylinder retains about 10%+ of its original blue, primarily in the flutes and in other protected areas. Overall, the gun retains about 30% original blue, averaged across the entire gun. The areas of finish loss have a pewter undertone with a thin plum-brown patina that is developing on the metal surfaces. The frame is mostly smooth with only some lightly scattered traces of pinpricking present here and there, primarily along the sides of the barrel from holster storage. There is also some pinpricking and minor light pitting near the muzzle, particularly at its face and along the right side of the barrel, near the muzzle. The cylinder shows a similar surface patina as the barrel and is mostly smooth with some small, scattered patches of light pinpricking present, as well as some oxidized surface roughness at both the face and rear of the cylinder. The gripstrap and backstrap are mostly a dull pewter gray with some traces of blue on the gripstrap and some scattered surface oxidation and some very minor roughness on the backstrap. The bore of the revolver is in about FINE condition and remains quite bright with crisp rifling that shows only some moderate frosting in the grooves, along with some scattered pinpricking along its length. There are also a few small patches of light pitting present here and there in the bore. The hammer retains about 50%+ mottled case coloring, most of which has faded and dulled to a medium pewter gray base color with darker casehardened mottling still visible. The hammer spur retains fine, sharp checkering. The color casehardened triggerguard has faded to a smoky gray patina with some freckles of surface oxidation and retains only some traces of the swirling case color in the protected areas of its webs. The trigger retains some flaked traces of the original niter blue near the frame, with most of the trigger having flaked, faded and worn to a silvery-gray patina. The screws have all faded to a lightly oxidized brownish-gray patina and retain no real blue to speak of. All of the screw heads are in very good condition, although a few show some light to moderate slot wear. The revolver is mechanically FINE and functions correctly. The revolver times, indexes and locks up exactly as it should and remains mechanically tight throughout. The automatic extraction system functions smoothly and correctly. The revolver locks up tightly and the frame to barrel fit is excellent with no wobble or looseness. The two-piece walnut grips rate about FINE and are in very nice condition for a set of US martial grips from the Indian War era. They both are solid and complete with no breaks, cracks, chips, or repairs. As noted, the right grip panel is correctly stamp-numbered to the revolver on its interior and the left grip retains a really wonderful cartouche. The grips show some minor rounding and softening from carry and use, and the sharp points at the leading and trailing edges of the grip edges are rounded and worn, with a tiny chip at the lower leading edge of the left grip and a couple of minor dings along the periphery of the lower edge. The grips do show some scattered bumps and dings from handling, use and storage, but remain in very nice condition.
Overall, this is a very crisp, FINE condition example of a very scarce US martial handgun from the Indian War era. This Smith & Wesson 1st Model Schofield is absolutely 100% complete and correct in every way. The revolver was delivered in 1875, a year before Brevet General George Armstrong Custer led most of his 7th Cavalry to their deaths along the banks of the Little Big Horn River. 1st Model Schofields are rather scarce, with only 3,000 delivered on contract to the military during 1875, and nearly twice as many of the 2nd Model Schofields delivered over the next two years. They are even harder to find with this much original blued finish and without any post Indian War civilian use modifications. By contrast, some 37,000 US M1873 Single Action Army revolvers were accepted for US military service between 1873 and 1892, about 12 times as many! With many of the Schofields being sold as surplus, and subsequently having their barrels shortened and getting new nickel finishes, it is rather difficult to find an all original, un-altered Schofield for sale. This revolver may have escaped the gunsmiths at Bannerman’s and Schuyler, Hartley & Graham by being issued to a State Guard regiment during the 1880s. With most of the 1st Model Schofields seeing hard service on the frontier with the 4th, 9th & 10th US Cavalry, these guns are hard to find in any condition, let along in such crisp condition with this much original finish on them. This is simply a very nice example of a US cavalry revolver, accepted into service during the height of the Indian War period, and significantly rarer than a US military Single Action Army revolver. 1st Model Schofield revolvers rarely appear in such nice condition and in any state of preservation that includes original finish. This would be a very nice example to add to your US martial handgun collection. An unaltered, Indian War era, Single Action Army in this condition and from this era would probably sell for two to three times as much as the price for this revolver! This is a much scarcer gun overall, and about one-third the price of a comparable Ainsworth or Nettleton inspected Colt. Don’t miss your chance to add a truly nice piece of US military an Indian War history to your collection.
SOLD
Tags: 1st, Model, Smith, &, Wesson, Schofield, Cavalry, Revolver, Fine