.41RF Colt New Line Revolver with Scarce Silver Finish
- Product Code: FHG-GB03-SOLD
- Availability: Out Of Stock
At the close of the American Civil War the Colt Patent Firearms Company was aware of two facts that would greatly impact their business practices for the next decade. First, the end of war not only meant no more major US military orders for handguns in the foreseeable future, but it also meant that thousands of surplus US military percussion revolvers would soon be flooding the market, making newly made percussion revolvers difficult (if not impossible) to sell. Second, the day of the percussion revolver was over, and the new self-contained cartridge handgun was the wave of the future. Unfortunately for Colt, Smith & Wesson held the exclusive rights to Rollin White’s patent on the bored-through cylinder, which meant that until that patent expired in 1869 there was no easy way for Colt to manufacture a traditional cartridge revolver without infringing upon that patent. The first of the Colt “bored through cylinder” cartridge revolvers to be offered in 1870, after the expiration of White’s patent, were not alterations of existing models, but were two completely new product lines, the .22RF Colt Open Top and Colt Cloverleaf House pocket revolvers. The Open Top series of arms continued the traditional Colt percussion revolver assembly practice of utilizing three basic parts to assemble the gun, the frame, barrel and cylinder. The Open Top, as the name implied had not top strap and the barrel was secured to the frame with a wedge as it had been with the percussion guns. The Cloverleaf House revolvers, however, utilized a solid frame and top strap with the barrel screwed into the front of the frame. This basic construction technique would become the standard for all future Colt revolver production. With the introduction of Colt’s iconic Model 1873 Single Action Army revolver in 1873, it was clear that even though the Open Top and Cloverleaf House series had been rather successful (over 114,000 Open Tops were produced with between 1871 and 1877 and just under 10,000 Cloverleaf House revolvers were manufactured between 1871 and 1876), Colt needed to bring a new series of modern pocket pistols to market that included the various design advancements provided by the Single Action Army, and also to compete with Smith & Wesson, and the numerous cheaply made “Suicide Special” revolvers that were already available for those who were looking to purchase a pocket pistol for protection. The new series of Colt pocket revolvers was dubbed, ironically, the New Line series. These guns were designed by William Mason of Colt and were covered under US Patent Number 155,095. Mason was the man responsible for many of Colt’s early cartridge revolver designs and alterations. The solid frame New Line series was introduced in 1873 and was available in five frame sizes, dependent upon the five basic chamberings of the gun. The revolvers were actually available in eight different calibers, including .22RF, .30RF and .32, .38 and .41 calibers; with the last three in both rimfire, or centerfire. The guns had five shot cylinders and were available with barrels ranging from about 2 ¼” to 10” in length, with the shorter barrels tending to predominate as these were, after all, pocket revolvers. The revolvers were single action, spur trigger affairs, with bird’s head shaped grips to increase their concealability. The standard finish was nickel plating with high luster nitre blued hammer and trigger surfaces and screws. Blued barrels with nickeled frames were available as well as fully blued revolvers and custom finishes including gold and silver washes were also options. Standard grips were two-piece varnished rosewood, but other exotic materials like ebony, mother of pearl and ivory were available for an extra charge as well. Interestingly, walnut, which had been the mainstay of Colt grips since the inception of the company, was rarely used on the New Line revolvers. Most of the New Line revolvers were produced in two models. The “First Model” had shorter cylinder flutes than the “Second Model” and the cylinder locking notches are located behind the flutes on the sides of the cylinder at the rear. The “Second Model” revolvers has much longer flutes, with the locking notches relocated to the rear face of the cylinder. One exception to this rule was the .30 Rimfire New Line revolver, which was only manufactured with the “Second Model” type cylinder, even though this revolver was only produced during the “First Model” period. Most models had their caliber or chambering acid etched onto the left side of the barrel, with the exception of the earliest production larger frame revolvers. As with most pocket pistols of the era, the .22 rimfire variant, with the smallest frame, was the most popular and some 55,343 were manufactured between 1873 and 1877. The .30 rimfire version, with the second smallest frame was only produced for three years, from 1874 to 1876, with some 10,946 being produced. The .32 caliber size frame was produced from 1873 to 1884, with some 22,000 revolvers being produced in both rimfire and centerfire versions. The next-to largest frame size was chambered for .38 caliber, again in either rim or center fire, and was manufactured from 1874 to 1880 with about 5,500 being manufactured. The .38 caliber guns were serialized in the same range as the largest frame, .41 caliber guns. The .41 caliber revolvers were also available in either rim or center fire versions, with some 9,363 guns being produced between 1874 and 1879. The total production of all frame sizes other than .22 was nearly 10,000 units fewer than the .22 caliber guns alone, attesting to the popularity of the smallest of the New Line family. In the end, it was Colt’s development of the 1877 series of double action revolvers in .32 Colt Rainmaker, .38 Colt Lighting and .41 Colt Thunderer that brought production of the New Line revolvers to an end. The new small-frame, double action revolvers were such an improvement over the single action spur trigger New Line guns, that the sales dropped of precipitously after the introduction of the 1877 revolvers. As the 1877s were available with short barrels for pocket carry, the customer who wanted a Colt for protection simply bought the new design. The other death knell for the New Line series was the continual influx of cheaply made “Suicide Special” pocket revolvers on the market. Colt simply could not compete price wise with these cheap and often unsafe handguns. As Colt was not willing to sacrifice quality in order to meet the price point of the competitors, they simply could not remain in that market and be economically viable.
Offered here is a FINE condition example of a later production, 2nd Model Colt New Line .41 Rimfire Pocket Revolver with a rarely encountered special-order silver finish. The New Line .41 revolvers had the largest of the New Line frames and were only produced for six years, from 1874 to 1879. During that time period only 9,363 .41 caliber New Line revolvers were produced, making it the second rarest of the New Lines, second only to the .38 caliber variants. Because the revolver is a later production example, serial number 9086, there is no acid etched panel on the left side of the barrel. Instead, the left side of the frame, below the cylinder is stamped 41 CAL. As a second model New Line, the revolver has the longer cylinder flutes, with stop notches cut on the rear face of the cylinder, rather than the rear side as they were on 1st Model guns. The top of the 2 ¼” long round barrel is roll marked in two lines:
COLT’S PT. F.A. Co
HARTFORD, CT. U.S.A.
The bottom of the barrel is weakly marked with the patent date information as well as the serial number. The serial number 9086 is stamped weakly on the bottom of barrel, on the rear face of the cylinder between two of the chambers and on the left side of the bird’s head grip frame, under the grip panel. Both grip panels are numbered 9086 in faded pencil in a period hand on their interior surfaces, with the marking in the left grip almost impossible to see. As noted above, the revolver is in about FINE condition. It retains about 40%+ of its original silver washed finish overall. The barrel retains about 20%+, with some of the barrel cleaned to bright metal, particularly around the barrel address. The silver is primarily in small streaky and freckled patches and there are a couple of small areas of lightly etched pinpricking. The frame retains about 60%+ of its finish, with some moderate thinning and high edge wear. The cylinder shows slightly more oxidized freckling and some bubbling and retains about 60%+ of its finish as well. The silver has a nice, muted, somewhat milky patina and is quite attractive. The areas where the silver has bubbled or oxidized has a freckled and darkened patina. The metal is almost entirely smooth and free of any significant pitting, although there is some scattered pinpricking present, most notable on the barrel and in some of the areas of freckled oxidation on the cylinder. There is also some tiny areas of scattered surface oxidation and flecks of oxidized surface scale are scattered on the frame and cylinder. All markings in the metal are fairly crisp and remain fully legible. The bore of the revolver is in about FINE overall condition and is mostly bright with crisp rifling, showing only some scattered pinpricking and some areas of darker oxidation along its length with a couple of small patches of light pitting near the muzzle. The original German silver front sight is in place on the barrel. The revolver is mechanically crisp and functions correctly in terms of firing. The revolver indexes, times and locks up exactly as it should. However, the cylinder bolt does not completely disengage in the half cock position, so the cylinder is not free to rotate when the hammer is at half cock. The two-piece grips are in about FINE condition as well and as noted they are correctly numbered to the revolver. The grips appear to be the normally encountered rosewood used on most of these revolvers. The grips are solid and complete and are free of any breaks, cracks or repairs. They retain some strong traces of their original varnish, with moderate wear and loss from handling, carry and use particularly along the high edges and contact points. The grips show some minor surface scuffs and some light bumps and dings from carry, use and storage, but show no signs of abuse.
Overall, this is a solid and crisp example of the largest sized of the Colt New Line Revolvers with a scarce special-order finish. The gun is 100% complete, correct and original and retains the large majority of its original silver washed finish. With less than 10,000 of these powerful little revolvers manufactured over the six-year period form 1874-1879, it can be difficult to find these large bore pocket pistols. This is a very nice example that is worthy of being added to any advanced collection of New Line Colt revolvers. This is one of those no excuses revolvers that displays well, in a scarce and desirable caliber with an uncommon finish.
Tags: .41RF, Colt, New, Line, Revolver, with, Scarce, Silver, Finish