Welcome to College Hill Arsenal
New Haven Arms No. 1 Volcanic Pocket Pistol

New Haven Arms No. 1 Volcanic Pocket Pistol

  • Product Code: FHG-1644-SOLD
  • Availability: Out Of Stock
  • $0.00


The guns produced by the New Haven Arms Company are some of the most historic and important weapons in the history of the development of modern repeating firearms. The company is probably most famous for manufacturing the famous Henry Rifle, and for being the launching pad for Oliver Winchester, and his subsequent company Winchester Repeating Arms. The New Haven Arms Company was built from the wreckage of the failed Volcanic Repeating Arms Company. Volcanic had been formed in July of 1855 as a joint stock company by Horace Smith, Daniel Wesson, and Courtland Palmer, with a number of investors, including Oliver Winchester, a shirt manufacturer from New Haven, CT. The Volcanic Company had been built upon an earlier failure, the original Smith & Wesson partnership. In both cases, Smith & Wesson and Volcanic, the goal of the companies was to manufacture and sell repeating firearms based upon the designs and patents of Walter Hunt and Lewis Jennings. Hunt had developed the “Rocket Ball” ammunition, which was a crude predecessor to modern fixed ammunition. The “Rocket Ball” combined the primer and propellant in the recessed cavity of a conventional lead bullet, instead of the traditional system of loading, in which all the components were loaded separately. While Hunt’s “Rocket Ball” was underpowered and somewhat unreliable, it was the first somewhat successful American attempt to create a self contained cartridge that was potentially useable in a repeating firearm. Hunt subsequently patented a crude repeating rifle design that utilized his ammunition. Hunt’s design was further improved upon by Lewis Jennings. Jennings modified and refined it, with the result being the Volition repeating rifle. As none of the designers had the capital or manufacturing capability to proceed with the venture, the patents were assigned to George Arrowsmith, who found the same difficulties, and subsequently sold the patent rights to Courtland Palmer. Palmer was a successful New York hardware merchant and budding industrialist. In 1850 Palmer contracted with Robbins and Lawrence of Windsor, Vermont to manufacture Jennings patent rifles using Hunt’s patent ammunition. It was there that the stars aligned, and a group of men that would revolutionize the firearms industry came to work together on the same project. They were Horace Smith, Daniel Wesson and B. Tyler Henry. All three worked on the Jennings rifle project at Robbins & Lawrence and started to come up with improvements and refinements to the design. The group realized that the single biggest issue with the Jennings design was the shortcomings in the ammunition, so the group went to work on that problem. They also set their minds to developing what would become the basic design for modern lever action firearms for the next 20+ years. This resulted in the Smith-Jennings rifle, but its complicated action and underpowered Hunt patent ammunition kept the design from being a commercial success. In 1852, at the completion of the contract with Robbins & Lawrence, Palmer left the endeavor. However, he appears to have remained in contact with Smith and Wesson. Over the next two years Smith and Wesson worked on improving the ammunition and the firearm designs. Their improvements received patents in 1854 for a new, improved ammunition design and for a repeating firearm with a toggle link action, the basis for all the Volcanic, Henry and early Winchester firearms designs. In 1854, with Courtland as their financier (and the holders of the Jennings an Hunt patents), the first incarnation of Smith & Wesson was born. The firm lasted for only a year, but produced the first of the lever action, toggle link firearms that would revolutionize the American arms industry. Some 1,700 guns were produced between 1854 and 1855, as small frame .31 pistols, larger frame .41 pistols and a handful of .50 rifles. The repeating guns received the nickname “Volcanics” from a review of the arms in the magazine Scientific American, which noted the rate of fire from the guns was like the eruption of a volcano. As with their previous ventures, the shortcoming in the design was the Hunt based ammunition that they chose to use. Smith & Wesson did not use their patented ammunition in the guns, but only an improved Hunt “Rocket Ball” design. The company soon fell on hard times and Smith & Wesson sold the company assets to an investment group that included (among others) Oliver Winchester, although they stayed on to work with the company. This group set up the Volcanic Repeating Arms Company in 1855. The group produced lever action pistols in .41 caliber, as well as lever action pistol carbines with 16” barrels and detachable shoulder stocks, and conventional style lever action carbines with 16”, 20” and 24” barrels. In 1857 the Volcanic Repeating Arms Company declared “insolvency” and went out of business. At this point, Smith & Wesson went off to pursue their own careers, and soon patented their self-contained rimfire metallic cartridge, and with the purchase of Rollin White’s “bored through” cylinder patent were producing the revolutionary Smith & Wesson #1 revolver. The remaining assets of the Volcanic company were assigned to Oliver Winchester and he formed the New Haven Arms Company on May 1, 1857. One of Winchester’s first moves was to hire B. Tyler Henry to be the manager for the factory. Henry was a brilliant and innovative designer and machinist and probably contributed as much to modern lever action rifle designs as later firearms genius John Browning. Under Winchester’s leadership and with Henry running the factory and workforce, the design of the lever action firearm came into its own. The company produced two frame sizes, the No. 1 in .31 caliber and the No. 2 in .41 caliber. The No.1 was manufactured as a 4” pocket pistol and a 6” target pistol, and the No. 2 was produced as a 6” or 8” “Navy” pistol, as well as a carbine with a 16”, 20” or 24” barrel. All of the a guns were available with either a plain, polished brass frame or with a plated and engraved frame. The plating and engraving cost an extra $1.50 on the No. 1 pistols and $2.00 on the No. 2 pistols, with the carbines varying between $2.00 and $3.00 more over their unadorned brethren. Over the next few years, some 3,370 pistols and carbines would be manufactured by the New Haven Arms Company. The guns were serial numbered from 1 upwards, in sequence of manufacture, without regard to model. Thus a 4” pocket pistol could be #32 and a 16” carbine could be #33, and so on. The New Haven Arms Company also introduced the Henry Rifle in .44 Rimfire Henry Flat in 1860. The “Henry”, both the gun and the ammunition, was the result of B. Tyler Henry’s constant efforts to improve upon the basic Volcanic gun designs and Hunt’s ammunition designs. The success of the Henry rifle and its subsequent improvements lead to the development of the classic M-1866 “Yellowboy” rifle, and in 1867, the New Haven Arms Company ceased to exist, and was replaced by one of the most famous firearms companies in history, the Winchester Repeating Arms Company.

Between 1857 and 1862, some 850 New Haven Arms Company No. 1 Pocket Pistols were manufactured. Due to the success of the name, and no doubt due to how well it worked in advertising and publicity, Winchester continued to market the guns as “Volcanic” pistols, even though that company was defunct. The pistols was advertised as having a 4” barrel, but in reality the octagon barrel was just over 3 “, measuring about 3 11/16” in length from the breech face to the muzzle. Like all Volcanic designs, it was a toggle link, lever action gun. Lowering the lever under the receiver to its “open” position pushed the bolt back against the hammer spur. This action cocked the hammer and raised the cartridge lifter. Pulling the lever back to its “closed” position closed the bolt and shoved the fresh cartridge from the lifter into the breech. It also returned the lifter to its resting position at the bottom of the receiver, where it was aligned with the magazine tube and would receive a fresh cartridge. The magazine tube under the receiver was spring-loaded and held 6 cartridges. The magazine for the longer barreled 6” target pistol held 10. A brass follower pushed the cartridges from the muzzle towards the receiver and the cartridge lifter. To load the pistol, the follower was pulled towards the muzzle, until it had passed a split in the magazine tube. The front 1” section of the tube could then be rotated about 45-degrees to the right, exposing he magazine tube for loading, or unloading. After inserting the cartridges, the front portion of the magazine was rotated back to the closed position and the follower was released. This system fed the improved Hunt’s patent “Rocket Ball” ammunition onto the cartridge lifter to allow the pistol to function. The standard version of the No. 1 Pocket Pistol sold for $12.00 with a polished brass frame, blued barrel and magazine, case hardened hammer and lever and two-piece wooden grips. For an extra $1.50, the pistol could be had with a silver plated and engraved frame. Special order grips, such as ivory, were also available for an extra charge.

This is example of a New Haven Firearms No. 1 Pocket “Volcanic” Pistol is in about NEAR FINE condition. This pistol is serial number 684, and is so marked on the left side of the grip frame, under the grips, and on the interior of the right grip panel. This number makes it s fairly early production pistol, placing it in the first 20% of production, and suggesting that it was probably manufactured circa 1857-1858, during the first year or two of New Haven’s operation. The pistol appears to be 100% complete and correct in every way. It remains in crisp and sharp condition throughout. The pistol retains about 10% to 20% of its original blue on the barrel and magazine, most of which has faded and blended with a smoky blue-gray patina. The metal of the barrel and magazine tube is mostly smooth, with only a handful of small, fingernail-sized patches of minor surface oxidation and pinpricking. The top of the barrel is clearly marked in two lines: NEW HAVEN CONN. / PAT. FEB 14, 1854.. The magazine tube retains its original brass follower and what appears to be the original magazine spring is in place. The follower moves smoothly and the spring retains good tension. The front of the magazine tube rotates smoothly and opens and closes as it should, with no undue stress or strain. The bore of the .31 pistol is in FINE condition and remains mostly bright, with strong rifling and only some lightly scattered pinpricking along its length. The case hardened operating lever retains no traces of the original case coloring, and has a mostly smoky gray patina with scattered areas of dark brown age discoloration and light surface oxidation. The hammer still retains some traces of the original case coloring with darker blues, purple and brown tones in its center, and more pewter colored metal around the edges, where the case coloring has “silvered out”. The action of the pistol works perfectly, and is mechanically excellent. The ring lever operates smoothly, the cartridge lifter raises and lowers as it should and the hammer cocks crisply and releases when the trigger is pulled. The brass frame has a lovely deep ocher patina that is untouched. The pistol is interesting in that the frame was apparently silver plated at the factory, but left un-engraved. The frame retains about 10%+ of the original silver-plating, with the two largest patches being on the bottom of the butt and on the inside of the grip strap. There are also traces of the silver on the lower portion of the backstrap and on the frame as well. The pistol retains its original blade front sight on the top of the octagon barrel, near the muzzle, and the original notched rear sight, dovetailed into the top of the brass frame. Even the screws of the pistol remain in very crisp condition, with only minimal slot wear and no abuse noted. The two-piece grips are in VERY FINE condition. They are free of any breaks, cracks, or repairs and remain solid. There are a couple of very tiny, old chips around the brass grip screw escutcheon in the right grip panel, but these are minor and hardly worth mentioning. The grips retain about 30%+ of their original varnished finished, and other than some minor handling bumps and dings, remain very crisp and sharp. The fit of the grips to the frame is excellent, and as mentioned above, the right grip is numbered to the pistol on its interior, while the left grip is unmarked.

Overall this is a really attractive, and unmolested example of a New Haven Arms No. 1 Pocket “Volcanic” Pistol. The gun has great eye appeal and is in very crisp condition with fine markings and grips, and a mechanically excellent action. With only 850 of these little pistols produced, and the majority of them plated and engraved, it can be hard to find an un-engraved example. This one is even more interesting in that it was factory plated, but not engraved, which is a true rarity. This would be a great addition to any collection of Civil War era pistols and is an essential bookend to a collection of 19th century American cartridge pistols. Many of these little guns went off to battle in the early days of the American Civil War in the pockets of young soldiers and officers, and this gun would be equally at home in a collection that represents the many early weapons that went to war from home. One way or another, this is a scare and desirable pistol that was the direct predecessor to the famous Henry Rifle and deserves a place in a collection of fine antique arms.

SOLD

Write a review

Please login or register to review

Tags: New, Haven, Arms, No, 1, Volcanic, Pocket, Pistol