Extremely Rare 1st Virginia Marked Virginia Contract Flintlock Holster Pistol by Miles
- Product Code: FHG-3678
- Availability: In Stock
-
$9,995.00
The history of the United States made military pistol really begins in 1775 with James Hunter and his Hunter Iron Works, better known as the Rappahannock Forge, outside of Falmouth, VA. There, Hunter produced a single shot smoothbore flintlock pistol of nominally carbine bore (about .65 caliber) that was essentially a copy of the British Light Dragoon pistol, down to the lobed buttcap. The guns were nominally 15” in overall length with pinned barrels of about 9”, simple brass furniture and walnut stocks. As was typical of the period, the guns were made without sights. This form of pistol, an American interpretation of the utilitarian British Light Dragoon Pistol would dominate the patterns of pistols acquired by the newly born United States for more than three decades and would remain in common use through the period of the War of 1812.
With the adoption of the United States Constitution in 1787 the New United States codified that the new Federal government would establish and fund a national navy, but it did not establish a national standing army. The new country considered a navy to be essential for maintaining free and open trade on the high seas but was afraid that a large standing regular army was a threat to democracy and freedom in the new republic. An extremely small Regular Army that was only authorized to include 700 men had been established in 1784 after the disbanding of the Continental Army, but its real purpose was to provide security along the north-western frontier of the new country in areas that now comprise portions of the states of Ohio, Michigan, Wisconsin, Illinois, Indiana and Minnesota. It was felt that the citizen soldiers of the militias of the various states would be sufficient to defend the new nation should a major threat materialize. This meant that the states were responsible to arm and equip their militias, should then be called upon to defend the state or the country. To this end the various states relied upon contracting with arms makers in New England and the gunmaking regions of Pennsylvania to procure the small arms that their militias would need should a military crisis erupt. This meant that the military arms of the period were often of varying patterns and types, and in most cases represented American interpretations of the British and French pattern arms that had been so ubiquitous during the period of the American Revolution. It would not be until 1794 that an Act of Congress would establish the National Arsenal System and authorize the construction of the arsenals at Springfield, MA and Harpers Ferry, VA. It would be several more years before these manufactories would be capable of producing anything more than a trickle of small arms, which meant a continued reliance upon the arms makers of New England and Pennsylvania to arm the militias of the new nation.
It appears that fairly early on a decision was taken on the part of the War Department and those in charge of procurement, that the national armories would concentrate on the manufacture of muskets and bayonets, and eventually some rifles. Pistols were a low priority for the armories and were generally acquired via contract from various makers. In fact, it would be 1805 before a pistol would be adopted for production at a national armory, with the adoption of the US Model 1805 Pistol which would be manufactured at Harpers Ferry. This would be the first pistol produced at a national armory and the only one produced at Harpers Ferry. In 1807 a new model of pistol was adopted for manufacture at Springfield Armory as the Model 1807, which very quickly abandoned for nearly a decade, until the production was revisited in 1817 to use up the parts. This would be the first pistol produced at Springfield and one of only three models to be manufactured there through its entire history. The second was the Model 1855 Pistol Carbine that was made in small numbers in the mid-1850s and the third was the Model 1911 Pistols that was produced during the World War I era. No other pistols, other than samples and experimental models, would be produced at a national armory. For the US military, the production of pistols would be the almost exclusive purview of private contractors.
One of the early contractors who would help to arm the new nation was John Miles Sr. of Philadelphia, PA. Miles was an English emigrant who had been born in 1752 and emigrated to the United States from London in 1790, settling in Philadelphia. Miles had learned his trade as an armorer to the Hudson’s Bay Company working at the Moose River Fort on Moose Island, at the mouth of the Moose River in Ontario from 1769 to 1777. This meant that he was in Canada during the period that the grievances between the English colonies and Great Britain were coming to a head and would explode into war in 1775. In 1777 Miles’ son John Jr. was born. The family returned to London that year, and it is likely that this decision was taken at least in part as a result of the war and his newborn child, although it is not clear if the return took place prior to or after John Jr.’s birth. It is possible that working in this wilderness may have given Miles and seeing the birth of the United States to his south may have given him a taste of the freedom and space that North America offered when compared to London and Great Britain. In 1778, at the age of 26, Miles joined the Yellow Regiment of the London City Militia. He probably continued to ply his trade as a gunmaker and gunsmith during this period, either as a contract workman for other London gunmakers or possibly for the London City Militia.
In 1790 the Miles family emigrated to the United States and settled in Philadelphia. Philadelphia had long been a major gunmaking center in America and was close to the other major gunmaking regions of Pennsylvania like Lancaster, Lehigh and Berks counties, all of which were within about 80 miles of Philadelphia. During the American Revolution the Continental Armory was located in Philadelphia as was the “French Factory”, another Continental arms making and repair facility. For a skilled armorer and gunsmith, this was the perfect place for Miles to relocate to. Miles established his own “Gun & Pistol Manufactory” and was one of the earliest makers to receive contracts to produce muskets for the new nation. In 1797 he would receive a contract to “assemble” muskets for delivery into public stores. These guns were produced with parts provided to the contractor by the Federal Government and assembled into 100 finished muskets. Other Philadelphia contractors who would perform the same duties would include Robert McCormick and Owen Evans. The guns were nominally of the French “Charleville” pattern and were mostly assembled with Ketland contract locks. That same year Miles received a contract from the Federal Government to delivery “Horseman’s Pistols”. Like the musket contract, this was an assembly contract that initially relied upon parts supplied by the Federal Government which Miles would assemble into complete pistols. The guns were nominally of the British Light Dragoon pattern. Miles would deliver 100 pairs (200 total) pistols to the Schuylkill Arsenal between mid-1797 and the end of 1798 and would also produce some 152 “Ship’s Pistols” during that time as well. Philadelphia maker Robert McCormick would also receive a similar 1797 Pistol Assembly contract. Based on the very limited number of extant examples from this contract it appears that Miles started to use parts of his own manufacture on some of these guns, as some examples with “Miles” marked locks are known and the McCormick guns invariably utilize commercial Ketland pistol locks. In 1798 Miles would receive a contract from the state of Pennsylvania to produce 2,000 “Charleville” pattern muskets. Miles also received a 400-gun contract from the Federal Government in 1798 to produce US Model 1795 pattern muskets. Another Pennsylvania contract to deliver 1,000 muskets would be received in 1801. 1801 was also an important year for the Miles business as they acquired the “instruments for gun making” from his Philadelphia competitor Robert McCormick in August of that year and also took over a portion of McCormick’s Pennsylvania musket contract which had been defaulted on. McCormick’s business had failed in July, and he was imprisoned for being a debtor. Miles continued to produce arms for both the Federal and state governments until his death in 1808. At that time his son John Jr. relocated to Bordentown, NJ and established his own gunmaking company. He received a contract from the Federal Government under the 1808 musket contracts, but by October of 1812 only delivered 2,407 before defaulting. His guarantor for the contract was the Philadelphia arms maker John Kerlin, who was also a parts subcontractor to Miles Jr. for the 1808 contract. Kerlin ended up taking over much of the contract upon which the younger Miles had defaulted. John Miles Jr. would die in 1852.
Of the guns produced by John Miles Sr. those contract pistols produced for the State of Virginia are among the most coveted. On October 30, 1801, Miles received a contract to deliver 300 pairs of holster pistols (600 total) to the State of Virginia. He would deliver these guns between 1802 and 1804. Like the Rappahannock Forge pistols the state had contracted for some 25 years earlier, the guns were nominally of the British Light Dragoon pattern. The guns were single shot, muzzleloading, smoothbore carbine bore flintlock pistols with nominally 10” pinned barrels, brass furniture and walnut stocks. Like most arms of the period, pistols in particular, some level of variation in barrel length and caliber is noted among the small number of surviving examples. Like the Light Dragoon Pistols, the guns had a lobed brass butt cap for reinforcement of the stock to allow it to be used as club, a simple brass triggerguard and a single brass ramrod pipe. The rudimentary S-shaped sideplate was secured with two lock screws passing through it, which held nominally 5” flat, beveled flint lock. The lock incorporated an integral rounded iron pan with an external bridle and short fence. The flat beveled cock was reinforced with heart-shaped cut out and the toe of the frizzen was curled. Most are marked on the lock in a two-line cartouche that reads MILES in a downward arc and PHILA in an upward arc, separated by dots. The most coveted examples are also marked on the barrel with Miles’ name, “PHILAD” and with a Virginia militia regimental mark.
Offered here is one of those very rare and desirable Virginia Contract Militia Pistol by Miles. The gun has the rare and desirable Miles maker and Virginia regimental barrel marking and reads in a single line:
MILES PHILAD • 1 , V’A. REG’T
The lock is marked with the typical Miles two-line cartouche that reads:
• MILES • PHILA
The pistol is nominally .64 caliber, or about “carbine bore” and the pinned barrel is 9 ¾”, nominally 10” which is typical of these guns. The 5” flat, beveled flint lock has a pronounced teat at the rear and features an integral rounded, bridled and fenced iron pan. The interior of the lock is marked with the initials N K, likely that of a workman or contractor who made the lock. The lower edge of the lock is marked with what appears to be the mating mark \\\X///, with a similar mark on the lower edge of the bridle inside the lock. The lock mounting screws have the mating mark X|||, which mate the screws to the pistol as the barrel is marked with the same mark underneath. The side plate is marked X||| on its reverse as is the stock in the sideplate cut out. The tang screw is marked || and is likely a period of use replacement from another of the contract pistols. The upper edge of the butt cap is marked XXX/// similar to the internal lock markings and could be a marking mistake intended to be X/// or could be a period replacement as well. The cock is of the correct form and type but may be an old replacement and the top jaw and screw may be replaced as well. At least a couple of the internal screws appear to be replaced, but the lock itself remains in its original flintlock configuration and is nor reconverted. The touchhole shows moderate amounts of erosion and is well centered in the pan. Endoscopic examination of the breech shows no indication of welding or modifications inside the barrel. The lock remains mechanically functional and operates as it should. The pistol retains clear and fully legible markings on the lock and the barrel. The barrel shows moderate oxidation and scattered light pitting with age discoloration present as well as some oxidized pinpricking. The barrel was cleaned long ago and is toning down now. The area around the barrel marking received the most cleaning, some of which was slightly aggressive, resulting in the marking being very clear and with a cleaned halo like area around it. The barrel has a medium steel gray patina with a freckled appearance from the speckles of oxidation. The lock was similarly cleaned but not quite has much and has a moderately oxidized gray patina with areas of darker discoloration. The sideplate is a rich ocher color with the brass having an obviously high copper content, sometimes referred to as “red brass”. The balance of the brass furniture, including the lobed butt cap, triggerguard, ramrod pipe and forend reinforcement have a medium golden patina suggesting they were cleaned long ago and are now toning down. The buttcap shows scattered bumps, dings and impact marks, as it was intended to be an ersatz club in battle and was likely an ersatz hammer from time to time during its service life. The reinforcing strip of brass near the tip of the forend is ¾” wide and is one of the small deviations from the British Light Dragoon Pistol design that helped reduce cracking and splitting of the forend. The pistol retains its original brass blade front sight; a feature not found on all Miles contract pistols but one that was becoming more common during the first decade of the 19th century. Te bore of the pistol is in fair to good condition and is moderately oxidized with scattered light to moderate pitting along its length. The stock shows moderate wear but is solid and free of any major breaks, cracks or repairs. Considering the pistol is more than two centuries old, the wood remains in very good condition. The wood appears to have been lightly sanded at some point in time but still retains decent edges and lines, even if the counterpane edges are not quite as sharp and crisp as when the gun was new. The lock mortise edges still remain rather sharp, particularly for the gun’s age. The rear of the grip shows some surface age drying cracks that are visible in the photos, but they do not appear to be structural. There is a tiny chip of wood missing above the top edge of the lock plate, behind the pan. There is also a moderate amount of chipped loss around the breech plug tang. The show scattered bumps, dings, mars and marks but really remains in lovely solid and complete condition for its age.
Overall, this is a really solid example of an extremely rare 1st Virginia regimentally marked Virginia Contract Holster Pistol by Miles. The gun is in original flint, is well marked and all of the major components are original and period with only a few minor small parts potentially replaced. Considering that the pistol is more than 220 years old, the state of preservation is really quite impressive. These guns rarely appear on the market for sale and when they do are usually priced in excess of five figures. This is a solid and complete example with strong clear markings that would be a wonderful addition to a collection of early US secondary martial pistols, a collection of Viriginia arms or a War of 1812 collection. Do not miss your chance to acquire this wonderful piece of history. This pistol was formerly in the well-known collection of late American Society of Arms Collectors member Paul Doyle, which gives it very good provenance.
Tags: Extremely, Rare, 1st, Virginia, Marked, Virginia, Contract, Flintlock, Holster, Pistol, by, Miles













