Welcome to College Hill Arsenal
Very Fine Connecticut Arms Company Hammond Bull Dog Pocket Pistol

Very Fine Connecticut Arms Company Hammond Bull Dog Pocket Pistol

  • Product Code: FHG-JM124-SOLD
  • Availability: Out Of Stock
  • $1,795.00


On October 25, 1864, Henry B. Hammond received his first patent for a firearms design, #44,798. The patent covered a unique pivoting breech system to load single-shot metallic cartridge firearms. Over the next dozen years, Hammond would receive no less than seven additional patents related to firearms. Henry, in conjunction with his brother Lewis, formed the Connecticut Arms & Manufacturing Company in Naubuc, CT circa 1865 and attempted to obtain US military contracts for a breechloading long arm utilizing their patented pivoting breech. The end of the American Civil War, and the need to find a way to alter the huge stocks of muzzleloading arms already in inventory to breechloading cartridge arms, meant that the Hammond brothers were simply in the wrong place at the wrong time in terms of obtaining US military contracts. The firm produced a limited number of sporting and military style long arms based upon their patents but met with minimal success. Then they hit on a design that achieved a modicum of success and insured that the company would not be only a footnote in firearms history.

 

Sometime in late 1865 or early 1866 they introduced a single shot cartridge pistol design based upon their pivoting breech patent. The pistol also included their patented extractor (#54,147 – issued April 24, 1866) and a patented sight (#61,007 – issued January 8, 1867). The standard production model was manufactured with a 4” octagon to heptagon barrel, where the top flat tapered to a point at the muzzle, leaving only seven instead of eight sides to the barrel at that point. The pistol was chambered for a .44 rimfire cartridge similar to the .44 Henry Flat, but shorter.  The barrels were brightly blued, and the receivers were casehardened in mottled colors. The grips were typically checkered gutta-percha, although some were made with checkered wood grips as well. Standard markings were a one-line manufacturing address on the top barrel flat, with a patent marking around the pivoting breechblock referring to the October 1864 patent. The single action pistol was operated by cocking the hammer and then pressing down on a checkered button on the top of the breechblock. This allowed the block to be rotated to the shooter’s left, revealing the chamber. After the cartridge was loaded, the breechblock was rotated back to its upright position and after fully cocking the hammer the pistol was ready to fire. A slot in the top of the breechblock release button served as a rear sight and a small German silver blade served as the front sight. After firing, the action could be opened in the same fashion and the patented extractor would pull the casing partially out of the chamber, allowing the user to remove it the rest of the way with their fingers. Over the years, the guns have received the collector nickname Hammond “Bull Dog”, but it is not clear if that was a period appellation. Some few examples are known with the name “Bull Dozer” on the side of the barrel. While nearly all of the Connecticut Arms & Manufacturing Company pistols were of the pattern described above, a handful were made in other calibers and different barrel lengths, including .22RF, .32RF and .50RF with barrels as long as 12” on the “target model”. Some of the guns were also produced with detachable, skeletonized metal stocks, allowing the pistols to be transformed into ersatz rifles. While the total production numbers for the guns are not known, most references place total production at somewhat around 7,400 guns, and certainly less than 8,000 pistols, before the company failed in 1868. Apparently enough of the guns were produced during the brief time that they were manufactured that they were still being offered for sale as “new old stock” well into the 1880s.

 

Offered here is a VERY FINE condition example of a Connecticut Arms & Manufacturing Company Single Shot Derringer – aka “Hammond Bull Dog”. The top flat of the barrel is clearly marked in a single line:

 

CONNECTICUT ARMS & MANFG Co NAUBUC CONN

 

The top, front edge of the breechblock is marked in single line, PATENTED OCT. 25. 1864 around the top edge of the block. This mark is quite clear as well and remains fully legible. The pistol bears no additional marks but is serial numbered 728 on the grip frame, under right grip and this same number is stamped into the inside of the left grip. The barrel of the pistol retains about 90%+ bright blue, with some minor edge wear and some loss due flaking at the breech. The barrel also shows some small impact marks around the web area on both sides, which are somewhat more evident on the right side. The barrel is quite smooth other than these small impact marks but does show some tiny patches of minor oxidized surface roughness here and there, mostly around the muzzle area. The receiver retains about 85%+ vivid case coloring, with some fading and dulling and the balance of the frame toning towards a smoky blue-gray patina. The hammer retains about 85%+ vivid case coloring as well, with most of the loss apparently due to fading and dulling. The hammer spur and trigger face are both checkered, as is the action release button on the top of the breechblock and in all cases the checkering remains quite crisp. The pistol is mechanically functional and the breechblock’s pivoting and locking mechanisms both work appropriately. The bore is in about VERY FINE condition as well and remains nearly all bright with crisp rifling. Only some frosting in the grooves along with some lightly scattered flecks of oxidation keep the bore from being truly like new. The two-piece checkered gutta-percha grips are also in VERY FINE condition. They are solid and complete with no breaks, cracks or chips and retain crisp checkering. The grips have a rich chocolate brown color that shows some fading on the right grip due to prolonged exposure to sunlight. The grips retain crisp checkering and show only the most minor light wear due to handling, carry and use.

 

Overall, this is a really wonderful example of a Connecticut Arms & Manufacturing Company Single Shot Derringer, better known as the “Hammond Bull Dog”. The gun is in wonderful condition and is very attractive. These pistols don’t often appear in this condition, as their intended design meant regular carry in a pocket where the finish was often worn away. This would be a wonderful addition to any collection of single shot pistols and derringers from the period of the old west and is certainly a gun you’ll be proud to add to your collection.


SOLD

Write a review

Please login or register to review

Tags: Very, Fine, Connecticut, Arms, Company, Hammond, Bull, Dog, Pocket, Pistol