Welcome to College Hill Arsenal
2nd Model Schofield - Wells Fargo Marked

2nd Model Schofield - Wells Fargo Marked

  • Product Code: FHG-1956-SOLD
  • Availability: Out Of Stock
  • $1.00


In 1870, the US Army purchased its first large lot of self-contained cartridge handguns. The purchase included 1,000 Remington rolling block single shot pistols chambered in .45-25, 1,000 Remington New Model Army .44 caliber revolvers altered to metallic cartridge and 1,000 Smith & Wesson #3 “American” revolvers in .44 S&W. While both officers and the rank and file had been requesting cartridge revolvers from the Ordnance Department since the end of the American Civil War, two large stumbling blocks had prevented the Army from abandoning the .44 caliber percussion revolver. The first was the fact that the Rollin White patent for the bored through cylinder, which was held by Smith & Wesson, would not expire until 1869. The Ordnance Department understood that no manufacturer could produce a successful metallic cartridge revolver design until that patent expired. Secondly, the Army had a massive inventory of percussion revolvers that were now becoming obsolete and had limited value for sale on the commercial market. As a result, the army continued to use its percussion revolvers well into the mid-1870s. The three types of cartridge handguns purchased all had their various supporters and detractors. The rolling block pistol was strong, simple and durable, but only offered a single shot. The altered Remington revolvers functioned suitably, but were still considered “make do” conversions of obsolete guns. The new Smith & Wesson design was modern and offered rapid unloading and extraction due to its top break design, and offered equally quick reloading. The downside to the Smith & Wesson was that it was somewhat delicate, with numerous small parts that were prone to breakage, and it was questioned whether it could stand up to the rigors of duty on the western frontier. One army officer who was particularly impressed by the Smith & Wesson design was Major George W. Schofield of the 10th US Cavalry, one of the famous regiments of “Buffalo Soldiers’ that was composed of African American soldiers. Schofield was so impressed with the design that he arranged to act as a sales agent for Smith & Wesson. Schofield sold over 100 Smith & Wesson #3 American revolvers between the fall of 1870 and spring of 1871. Most of those guns were almost certainly sold to other cavalry officers, and as a result Schofield started to build a foundation of support for the Smith & Wesson design. Schofield did note that there could be improvements made in the #3 design, and went to work to modify the revolver to be more “cavalry friendly”. The most striking improvement was to redesign the latch that closed the top break frame. The original #3 design had the latch mounted in the top strap of the revolver and required the user to hold the gun with one hand and lift the latch to break the gun open with the other hand. This was awkward at best on horseback and even more difficult if the horse was moving any faster than a walk. Schofield’s improvement relocated the latch to the frame of the revolver and designed the catch so that the thumb of the right hand could depress it while the pistol was being held in a conventional grip. The top of the barrel of the pistol could then be pushed against the trooper’s leg or saddle, opening the action and ejecting the empty cartridges. This allowed one handed opening and ejection and made the gun much easier to use on horseback. Schofield also designed improvements to the ejection system, and received patents for his innovations in June of 1871 for the latch and April of 1873 for the ejection system. With these improvements to the revolver, Schofield proceeded to arrange for US Ordnance Department trials of the new pistol. However, Schofield was a little late. In November and December of 1872 additional trials had taken place between several models of Smith & Wesson and Colt revolvers. The winning design was the Colt, a gun that would become the most famous and recognizable handgun of the old west era, the Model 1873 Single Action Army, aka “Peacemaker”. The Colt design was found to be more durable, simpler, stronger, more accurate and to contain significantly fewer parts, when compared to the Smith & Wesson submissions. After the favorable testing, Colt received an order to deliver 8,000 revolvers chambered for the .45 Colt cartridge, the cartridge found most desirable by the Ordnance Department after testing numerous cartridge designs between 1872 and 1873. Schofield should have accepted defeat at this point, but he had quite a bit of political pull within the army. His brother was General John Schofield of Civil War fame, and the General was a friend of General William Tecumseh Sherman, who served as General of the Army (five star general) from 1869-1883. General Schofield had also served briefly as the Acting Secretary of War (June 1868-March 1869), had been in command of the Military Division of the Pacific, and in 1876 would be made the Superintendent of The US Military Academy at West Point. Between Major Schofield’s inroad with officers who supported the Smith & Wesson design and the political influence of his brother, he managed to get his redesigned Smith & Wesson revolver in front of the Board of Ordnance for review in June of 1874. The findings were sufficiently positive that a contract was let to Smith & Wesson for 3,000 of the new “Schofield” model revolver in September of 1874. These guns would become known to collectors as 1st Model Schofield revolvers. They were six-shot, single-action revolvers with 7” ribbed barrels, and a square butt profile and two-piece walnut grips. While most were blued with color case hardened triggerguards, hammers and barrel catches, some were delivered in nickel. These .45 caliber revolvers were chambered for the .45 S&W (aka .45 Schofield) cartridge. The action of the revolver could not function with the standard .45 Colt cartridge then in use. The Colt cartridge was too long for the Smith & Wesson cylinder, and the rim of the Colt cartridge was too small to be effectively engaged by the star extractor of the Smith & Wesson, which meant that the Colt cases would fall through the extractor become stuck in the cylinder chambers. The .45 S&W cartridge was about .10” shorter than the .45 Colt, with a larger rim, and slightly smaller powder charge and lighter bullet. The Smith & Wesson cartridge could be used in the Colt revolvers, but the Colt cartridge could not be used in the Smith & Wesson guns. Initial reports from the field were positive enough that a second contract was let to Smith & Wesson for 3,000 more revolvers in March of 1875. These would become known to collectors as the 2nd Model Schofield. In all, a total of 5,285 2nd Model Schofields were delivered to the US Army between 1876 and 1877, with a total production of 5,934. In most respects the guns were identical to the preceding “1st Model”, with the most noticeable improvement being the dishing out of the barrel catch to make it easier to put your thumb into it and open the action. This also changed the profile of the catch itself and the rear sight that was built into the catch. The other major change cannot be seen, but the frames of the 2nd Model Schofield revolvers were made of steel instead of iron. Major Schofield received a $.50 per unit royalty payment for design improvements for every 2nd Model that was sold, but did not receive any royalty payments for the 1st Model revolvers. The Schofield revolvers were issued throughout the US cavalry in an attempt to get good side-by-side comparisons of their effectiveness and durability as compared to the Colt M-1873. The guns saw significant service with the 4th US Cavalry, as well as with the 9th & 10th US Cavalry (the Buffalo Soldiers). However, it was not long before the original complaints about the Smith & Wesson #3 in terms of fragility and mechanical issues began to rear their ugly heads again. However, the ammunition for the guns caused an even bigger problem. The intentional issue of the Colt and Smith & Wesson revolvers to the same regiments resulted in ammunition snafus. In an attempt to circumvent this issue, Frankford Arsenal developed a universal cartridge for use in both revolvers. It was shorter and lower powered than the .45 Colt and had a slightly larger rim to help with extraction from the Smith & Wesson. However, it was not uncommon for .45 Colt ammunition to be issued to troops with Schofield revolvers, who could not use it. Likewise, the .45 S&W ammo had such a large rim that it often prevented all of the chambers from being loaded in a Colt revolver, or could even cause the Colt cylinder to bind up. Despite the significant advantage in unloading and loading speed that the Schofield offered, the numerous small issues with the mechanism and the ammunition difficulties resulted in the gradual removal of the Smith & Wesson revolvers from US military service. This is somewhat ironic, as during the decade from 1873 to 1882, Smith & Wesson would produce about twice as many of their large frame single action revolvers (mostly the various #3 models) than Colt would produce Single Action Army revolvers. Smith & Wesson found their success with the civilian market and with foreign military contracts, while Colt continued to find the US government their single largest customer. During the 1880s, the US military began divesting themselves of both 1st & 2nd Model Schofield revolvers. The guns were primarily sold to Schuyler, Hartley & Graham and Francis Bannerman & Company, both of New York. Many of these guns were subsequently altered by having their 7” barrels cut down to 5”, and often the guns were nickel-plated. The single largest customer for these altered Schofield revolvers was the Wells Fargo Express Company, who marked the guns W.F. & CO'S. EX. when they purchased them. However, some Schofield revolvers remained in service right up to the era of the Spanish American War, and some are noted by serial number in the Springfield Research Service series of serial number books as being in used during the mid to late 1890s, mostly with state militias and guard units. This is supported by the fact that as late 1890, Frankford Arsenal was still loading the universal .45 caliber Colt/S&W cartridge. As the large majority of military contract Schofields were sold as surplus and altered during the 1880s and 1890s, it is difficult to find them in fine original condition and in their original configuration. Much like the 7 ““ Single Action Army “cavalry” revolvers that were mostly altered to mixed number, 5 ““ “artillery” configuration, original cavalry Schofields are scarce and extremely desirable. However, like the “artillery” model Colts, some variations of the altered Schofield revolvers are extremely desirable, and chief among those are the Wells Fargo marked guns that continued to see service in the American west long after their original military service came to an end.

Offered here is a FINE example of a Wells Fargo marked Smith & Wesson 2nd Model Schofield revolver. The gun is 100% complete and correct in every way and is a very nice condition, completely correct example of government surplus gun that was refurbished and altered by Schuyler, Hartley & Graham and sold to the famous stage coach company. The revolver is serial number 3248, and that number is clearly stamped in the butt of the revolver, along with the ownership mark US. The serial number is also clearly stamped on the rear face of the cylinder and inside the right grip panel, as well as on the right-hand side of the ejector housing, forward of the Wells Fargo ownership mark. The inspector initials W and P are crisply stamped in the bottom of the barrel web, with the initials P and W on the rear face of the cylinder and the initial W on the inside top of the bottom of the frame. The left side of the ejector housing is clearly stamped in two lines, with a Maltese Cross at each end of the legend:

SMITH & WESSON SPRINGFIELD MASS. U.S.A. PAT. JAN. 17TH
& 24TH 63. JULY 11TH 65. AUG 24TH 69. JULY 25TH 71.

The right side of the ejector housing is marked in a single line:

SCHOFIELD’s PAT. APR. 22D 1873

This line is also flanked by a pair of Maltese Crosses. Under this mark is the extremely desirable Wells Fargo ownership mark that reads:

W.F.&CO’s. EX 3248

The ownership mark of the Wells Fargo Express Company, followed by the serial number of the gun. Due to the desirability, collectability and value of Wells Fargo marked firearms, many guns are spuriously marked usually incorrectly) in order to enhance their value. This Wells Fargo marking is 100% correct and authentic. The grips both bear very nice cartouches from their original military service. The right grip has a clear script CW cartouche for US arsenal sub-inspector Charles Woodman. The left grip has an equally fine script DAL, for US Ordnance Department inspector Lt. David A. Lyle, under the acceptance date 1877. This gun would have been fairly early in the production for the 2nd Schofield contract from March of 1875, and would have been in the 1st third of total production for 2nd Model Schofield revolvers. Interestingly, the gun was delivered toward the end of the deliveries as it is Lyle inspected instead of Lt. James Rockwell Jr. inspected (JRJr) and is dated 1877 rather than 1876 as most of the guns in this serial number range would have been. The pistol is really in about FINE condition. The frame retains about 50%+ of what appears to be the original factory blue overall, showing some flaking, wear and fading, with most of the heavy finish wear and loss along the backstrap, and gripstrap, as well as some minor loss along the high edges and contact points. The barrel retains about 10% of its original blue, primarily in the protected areas, nooks and crannies. The barrel has a slightly mottled grayish-brown patina, with some lightly scattered areas of minor surface oxidation and some very lightly scattered pinpricking. The areas of the frame that show finish loss, particularly the gripstrap and backstrap, have a very smooth grayish-brown patina that is attractive and does not detract in any way from the large amount of original finish on the frame. As noted, the barrel shows some lightly scattered areas of minor surface oxidation, some pinpricking and small amount of pitting at the end of the barrel, close to the muzzle. The frame remains mostly smooth with only some very lightly scattered flecks of surface oxidation and a few tiny areas of very minor pinpricking. When Schuyler, Hartley & Graham resold these guns to Well Fargo, they refurbished them and refinished them as needed. The only area where it is clear that the gun was refinished is on the butt, where the blue is a little duller and cloudy and the markings show just the smallest amount of wear suggesting the polishing before re-finishing. The remained of the surviving blue compares favorably in terms of color and quality to the Smith & Wesson factory finish and might be original, with SH&G not needing to refinish all of the gun when it was sold as surplus. The barrel of the gun has been cut to the nominal 5” length, and measures exactly 5 1/8” from the muzzle to the face of the cylinder. The bore of the revolver is in about NEAR FINE condition as well, and remains mostly bright with crisp rifling. The bore shows some scattered light pitting, mostly in the grooves, as well as some pinpricking and frosting. The cylinder retains some strong traces of original blue as well, mostly in the cylinder flutes, with the balance having a thin plum-brown patina that matches the barrel of the revolver well and showing the wear of a turn ring through the cylinder stop slots. The chambers remain smooth and bright and are in excellent condition as well. The hammer retains about 50%+ of its period case coloring, which has faded and dulled with age. The hammer spur retains excellent, sharp checkering. The barrel catch retains even more vivid case coloring. The triggerguard retains about only the most minute traces of case coloring and has a mostly dusky bluish-gray patina. There is still some vibrant coloring present on the web at the front and rear of the triggerguard. The trigger retains about 20%+ of its original niter blue, having faded significantly (especially on the face) and with some silvering on the edges and contact points. All of the screw heads are in good condition, with some showing light to moderate slot wear, and balance appearing quite crisp. The revolver is mechanically FINE and functions perfectly. The pistol indexes, times and locks up perfectly, and the extraction system functions smoothly and correctly. The revolver locks up tightly and the frame to barrel fit is excellent with no wobble or looseness. The two-piece walnut grips are in FINE condition and remain quite crisp and well-marked. They both are solid and complete with no breaks, cracks, or repairs. As noted the right grip panel is correctly stamp-numbered to the revolver on its interior and both grips retain nice, visible cartouches and the left grip shows an excellent 1877 acceptance date. The grips do show some light bumps and dings from handling, use and storage, but are in truly great condition.

Overall this is very nice example of a scarce US martial handgun from the Indian War era that saw additional use with the most famous stage coach and freight company of the post-Civil War western era. This Smith & Wesson 2nd Model Schofield is 100% complete and correct in every way. The revolver was delivered in 1877, the year after Brevet General George Armstrong Custer led his 7th Cavalry to their death along the banks of the Little Big Horn River. 2nd Model Schofields are rather scarce, with only 5,285 delivered on contract to the military between 1876 and 1877. By contrast, some 37,000 US M-1873 Single Action Army revolvers were accepted for US military service between 1873 and 1892; about 7 times as many! After it had done its military service, this gun again rode the western trails protecting the travelers, freight and maybe even the payrolls of western expansion. While many of the surplus shortened Schofields received nickel finishes during their refurbishment, this one has survived in a very nice state of blued and case hardened, looking almost as it did during its military service with only the shortened barrel and added Wells Fargo markings to differentiate it from its original military service. This gun would be an equally wonderful addition to a collection of old west martial arms, Smith & Wessons or a collection that concentrates on the Wells Fargo Express Company. It fits well in all of those niches and will certainly be a very nice addition to your collection. High condition Wells Fargo marked guns don’t show up on the market very often as most of these guns saw hard use during their post-military careers. Don’t miss your chance to add a very nice piece of US military and Indian War and western history to your collection.

SOLD

Write a review

Please login or register to review

Tags: 2nd, Model, Schofield, Wells, Fargo, Marked